2 polypropylene climbing ropes to exercise the arms and shoulders (Alternative manilla ropes also available upon request at no extra cost).
2 Uprights with angled crossbar rebated to jump, stretch and touch highest place possible.
3 individual benches set at 3 different lengths with toe bar.
Four 145mm long boards mounted on logs.
2 uprights with an angled crossbar rebated to jump, stretch and touch highest places possible.
A course of five tapered stride boards.
Four different diameter weight lifting beams suspended on secure chains for upper body fitness repetitions.
Two end supports for access to overhead ladder, with stainless steel hand rungs.
A five unit hurdle course with level and tapering hurdles.
Two steel bars supported on timber posts.
Six horizontal logs forming a gate configuration.
Seven horizontal logs, fixed on support timbers.
A fully supported combination (polypropylene with steel core) climbing net.
Four ascending horizontal beams on support timbers.
Three balance beams. Varying thickness, height and length according to installed angles.
A combination (polypropylene with steel core) rope 'V' bridge, supported by two end frames.
A fully supported combination (polypropylene with steel core) net with ladder access.
Twelve stepping logs. 150mm diameter timber.
Simple bench design used for a number of different exercises such as star jumps, step ups, press ups, sit ups etc. Our 'Indicator Plates' can show users what to do.
Simple inclined bench designed for a number of different exercises, such as star jumps, step ups, press ups, sit ups etc. Our 'Indicator Plates' can show users what to do.
Eight overhead rings with approximately 0.3m hang.
A wobbling board suspended on chains and connected to anchor posts. Timbers: 125mm diameter.
Exercise platform designed for sit-ups, but can also be used for press ups, step ups etc.
Eight different post heights for leap frog exercises.
A series of five parallel 125mm diameter logs for fast bunny hop exercise.
A single bench sit up, fitted with a 'U' shaped stainless steel hand hold.
A single angled beam for side vaults and over/under exercises.
A straight, smooth faced climbing wall with a parallel run of hand and foot blocks. Foot blocks are close to the bottom edge so the unit is classed as low level.
Two 3.6m long balance logs, set at opposing angles to confuse the senses.
2m x 3m fixed polypropylene scramble under net. Can be installed over a layer of Compliant Grow-Through Tiles for grass reinforcement.
A fully supported elevated horizontal rope crawl.
Three 600mm (internal diameter) tubes arranged in a challenging layout.
A straight, smooth faced climbing wall - no hand or footholds. Height can be reduced by removing slotted boards, as illustrated.
A straight, smooth faced climbing wall with a top fixed polypropylene rope pull but additional hand or footholds.
A fully supported combination (polypropylene with steel core) cargo net on one side and a solid timber wall and polypropylene rope pull on the other. Note: Image illustrative only and shows FT922.
A series of ground fixed car tyres for quick running. Can be arranged in a hopscotch pattern and/or installed over a layer of Compliant Grow-Through Grass Tiles for grass reinforcement.
Three levels of chinning bars, plus 1 low level lying heaves bar. 2 bars at 2.3m, 1 bar at 2m and 1 bar at 1m.
Four different diameter / weighted beams suspended on stainless steel bars. For weight lifting 'clean and jerk' or 'squat' repetitions.