Pair of 6.4m x 2.13m 60mm dia. Freestanding Junior Heavyweight Goals

A pair of sturdy, freestanding steel football goals which can be converted to a portable goal with the use of flip over wheels (supplied separately).

Round steel plates on the bottom of the uprights prevent marking of artificial surfaces.

Junior goal size: 6.4m x 2.13m (21ft x 7ft)

50mm square steel uprights and backbar provide stability and distribute the weight evenly.

Goals are zinc phosphated and powder coated white to provide a tough scratch resistant finish.

Additional strength and safety are provided by the fully welded crossbar corner joint.

A unique hexagonal rivet with a 12mm thread provides a secure fixing.

Uprights and crossbars 60mm diameter x 4mm thick steel.

Full length net supports are 32mm diameter zinc plated steel.

Supplied with 4 'U' shaped anchors (PEG-021) for pegging down on grass.

If required, flip over wheels and nets need to be ordered separately.

Recommended wheels: FBL-556 (sold separately)

Recommended nets: FBL-090 (sold separately)

When looking at linked components for these goals please only consider Harrod Sport products which are always prefixed with three letters and a hyphen e.g. 'FBL-' rather than the alternative 'FO-'which come from different manufacturers and are not usually compatible

Supplied as a set of 2 goals. Half sets are available upon request.

This goal must be anchored at all times to conform to BS 8462. A risk assessment should be carried out to ensure the suitability of the anchors used. Soil conditions are an important factor in the use of grass type anchors as soft or sandy soil may not hold the anchors.

Regular maintenance is required for these posts, chips and scratches should be treated to avoid corrosion.

137.00 kg per set.