Hockey Pitch Dividers & Netting

Black pitch divider netting, priced per linear metre. Available in 3m or 4m heights. Includes bottom band rope and lead line for ballast to reduce blowing in the wind. 2.0mm twine thickness. Black polypropylene netting with selvedged edges. UV resistant. 50mm square mesh. Sold per linear metre at 3m or 4m high.

Pair of pitch divider posts, with either a 3m or 4m out of ground height. Supplied without sockets for concreting directly into the ground. 100mm square x 5mm wall galvanised steel poles with either...

Pair of pitch divider posts supplied with ground sockets. These posts are available with either a 3m or 4m out of ground height. Includes two 1m deep ground sockets. 100m square x 5mm thick galvanised steel poles.

Pair of 1m deep ground sockets for pitch divider posts. Sockets supplied are 1 metre deep to fit 100mm x 100mm square section pitch divider posts. Price is for sockets only. Pitch divider posts are not included.

Pitch divider straining wire, available per linear metre or by 70m reel. 4mm diameter, looped at one end. Please note: It is more economical in most cases to buy a full 70m reel of wire.

60mm plated steel dog clips (pack of 50) used for hanging sports netting to tensioned wire. Passivated for protection against the elements. Typically two dog clips recommended per metre of netting. Price is for a pack of 50 clips.

This pouch is designed to store pitch divider netting, protecting it from damage when not in use and fixes to the perimeter fence. Supplied with 2 fixing plates and Antiluce fasteners. Pouch is manufactured from black PVC.