Pair of S8 Square Tennis Posts without Sockets

Set of S8 76mm square steel tennis posts without ground sockets.

Winder and anchor post manufactured from 76mm x 3.2mm square section steel.

Winder post fitted with a heavy duty brass winder mechanism, handle and pulley wheel.

Grooved top cap on anchor post.

Complete with 2 stainless steel net retaining rods to secure net close to posts.

All steelwork is zinc phosphated with a baked on green polyester powder coating to give a tough scratch resistant finish.

These tennis posts conform to BS EN 1510.

Please note: No ground sockets are included.
Steel tennis posts require regular maintenance and all chips or scratches must be treated to prevent rust and corrosion. To maintain the winder mechanism we suggest the use of a light spray grease, such as WD-40 Grease (rather than the more common WD-40 lubricant). With the tube nozzle and careful application you can target it directly onto the spindle and gears without it getting on to the cogs, the headline wire or the net itself.

To ensure the compatibility of your sockets or posts, please use our Special Tennis Post / Sockets Requirement Form.

It is very important to complete this form and return it to us. We can then best match your existing sockets to compatible manufacturers' tennis posts. We can not be held responsible if posts and sockets do not match unless we are provided with all the information required.

21.00 kg per set
<!-DR0214 -->