S8 Square Anchor Tennis Post Only

Replacement Square S8 76mm x 3.2mm steel anchor post.

Anchor post has a grooved top cap.

Complete with stainless steel net retaining rod.

All steelwork is zinc phosphated with a baked on Green polyester powder coated finish to give a tough scratch resistant finish.

This post conforms to BSEN1510.

Anchor/dummy post only (no socket or winder).

Steel posts require regular maintenance and all chips or scratches must be treated to avoid corrosion. To maintain the winder mechanism we suggest the use of a light spray grease, such as WD-40 Grease (rather than the more common WD-40 lubricant). With the tube nozzle and careful application you can target it directly onto the spindle and gears without it getting on to the cogs, the headline wire or the net itself.

If you are unsure about the compatibility of your sockets or posts, please use our Special Tennis Post / Sockets Requirement Form.

It is very important to complete this form and return it to us. Only then can we best match the correct compatible manufacturers post to your existing socket. We can not be held responsible if posts and sockets do not match unless we are provided with all the information required

8.00 kg each.
<!-DR0214 -->