S8 Square Winder Tennis Post Only

Replacement S8 76mm x 3.2mm square steel tennis winder post only - no socket included.

Winder post fitted with a heavy duty brass winder mechanism, handle and pulley wheel.

Complete with stainless steel net retaining rod.

Steel post is zinc phosphated with a baked on green polyester powder coated finish to provide a tough scratch resistant finish.

Conforms to BSEN1510.

Steel posts require regular maintenance and all chips or scratches must be treated to prevent corrosion. To maintain the winder mechanism we suggest the use of a light spray grease, such as WD-40 Grease (rather than the more common WD-40 lubricant). With the tube nozzle and careful application you can target it directly onto the spindle and gears without it getting on to the cogs, the headline wire or the net itself.

If you are unsure about the compatibility of your sockets or posts, please use our Special Tennis Post / Sockets Requirement Form.

Please complete this form and return it to us. This will enable us to best match your existing socket to the correct, compatible manufacturers post. We can not be held responsible if posts and sockets do not match unless we are provided with all the information required

8.50 kg each.
<!-DR0214 -->