We use cookies to make your browsing experience better, personalise content or ads and analyse our traffic. By clicking “Allow Cookies”, you consent to our use of cookies. Learn more.
Heavy Duty Freestanding Aluminium Hockey Goals
Pair of regulation size aluminium hockey goals, lighter and requiring less maintenance than a steel goal.
Designed for use on sand or water based synthetic surfaces.
Easily moved when used with the optional cellular rubber wheel kit, preventing damage to the synthetic surface.
Reinforced aluminium backboards are 460mm high and fitted with green noise absorbing carpets on the inside face.
All aluminium components are iron-phosphated and polyester powder coated white providing a very tough scratch resistant finish.
Stainless steel net retaining rods are fitted to the uprights and crossbars, ensuring the net is held securely in place.
For added strength the side frames come complete with fully welded back tubes and lifting handles.
Goal size: 3.66m x 2.14m
Uprights, crossbar and side frames are 50mm x 65mm x 2.5mm thick reinforced aluminium.
Corner joints are 8mm thick steel plate, zinc plated.
Net supports and top backbar are 32mm diameter x 2.6mm thick aluminium.
Stainless steel bolts throughout.
Regular maintenance of hockey goal is required, chips or scratches should be treated to prevent corrosion at these points.
These hockey goals conform to BS EN 750 when correctly assembled and anchored.
Assembly must be carried out as per the manufacturers' instructions.
Anchoring options, sold separately:
Fence anchors, see product ref: ANC-022 (4 required per set of hockey goals)
Counterbalance 'handbag' weights, see product ref: ANC-005 (20 required per set of hockey goals)
Where anchors are being used, a risk assessment of suitability must be carried out.
Hockey nets need to be ordered separately. Recommended nets: HOC-003
190.00 kg per set.
See our Delivery Policy for full details.